https://bladesetnew.com Thu, 28 May 2026 16:15:59 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://bladesetnew.com/woodpeckers-flat-top-dado-blade-set-8-diameter-58-arbor-new-in-box/ https://bladesetnew.com/woodpeckers-flat-top-dado-blade-set-8-diameter-58-arbor-new-in-box/#comments Mon, 24 Nov 2025 04:03:48 +0000 https://bladesetnew.com/woodpeckers-flat-top-dado-blade-set-8-diameter-58-arbor-new-in-box/























Brand new unused Woodpeckers Flat Top Dado Blade set with 6-piece set of magnetic shims in original box. Flat ground teeth on all the blades avoids the “bat ears” seen on traditional beveled tooth blades, perfect for exposed rabbets, dadoes, grooves and box joints. Please note that all blades have been kept in their original packaging with the factory applied anti-corrosion coating, and should be cleaned prior to use. Total of 6 blades. Left and right outer blades each have 24 flat ground teeth of 1/8 width set at a 5-degree negative hook angle for very clean cutting. All 4 chippers have solid plates with 12 flat ground teeth (instead of the usual 2 or 4 teeth) set at a 5-degree positive hook. Chippers include two 1/8″ wide blades, one 1/4″ wide blade and one 1/16 wide blade. Solid plate blade design increases rigidity of the dado stack and allows it to run quieter than sets with traditional winged chippers. With 12 teeth, chippers cut more smoothly and are easier to stagger properly with each other and the outer blades than 2- or 4-tooth designs. The 1/4″ chipper takes the place of two 1/8″ blades found in other sets so you will need less stacking and aligning of blades against each other to get to your needed cut width. Set of 6 magnetic shims stay in place and won’t get caught in arbor threads and allow for fine tuning of dado stack width.

]]> https://bladesetnew.com/woodpeckers-flat-top-dado-blade-set-8-diameter-58-arbor-new-in-box/feed/ 0 https://bladesetnew.com/woodpeckers-ultimate-dado-blade-set-8-diameter-58-arbor-new-in-box/ https://bladesetnew.com/woodpeckers-ultimate-dado-blade-set-8-diameter-58-arbor-new-in-box/#comments Sun, 17 Aug 2025 05:20:04 +0000 https://bladesetnew.com/woodpeckers-ultimate-dado-blade-set-8-diameter-58-arbor-new-in-box/





















Brand new unused Woodpeckers Ultimate Dado Blade Set with 6-piece set of magnetic shims in original box. Please note that all blades have been kept in their original packaging with the factory applied anti-corrosion coating, and should be cleaned prior to use. Total of 6 blades. Left and right outer blades each have 24 beveled teeth of 1/8 width set at a 5-degree negative hook for very clean scoring/cutting in all materials. All 4 chippers have solid plates with 12 flat ground teeth (instead of the usual 2 or 4 teeth) set at a 5-degree positive hook. Chippers include two 1/8″ wide blades, one 1/4″ wide blade and one 1/16 wide blade. Solid plate blade design increases rigidity of the dado stack and allows it to run quieter than sets with traditional winged chippers. With 12 teeth, chippers cut more smoothly are easier to stagger properly with each other and the outer blades than 2- or 4-tooth designs. The 1/4″ chipper takes the place of two 1/8″ blades found in other sets so you will need less stacking and aligning of blades against each other to get to your needed cut width. Set of 6 magnetic shims stay in place and won’t get caught in arbor threads and allow for fine tuning of dado stack width.

]]> https://bladesetnew.com/woodpeckers-ultimate-dado-blade-set-8-diameter-58-arbor-new-in-box/feed/ 0 https://bladesetnew.com/new-fit-for-cummins-generator-set-reverse-fan-blade-4931795-diameter-610mm-1pcs/ https://bladesetnew.com/new-fit-for-cummins-generator-set-reverse-fan-blade-4931795-diameter-610mm-1pcs/#comments Fri, 07 Jun 2024 03:13:57 +0000 https://bladesetnew.com/new-fit-for-cummins-generator-set-reverse-fan-blade-4931795-diameter-610mm-1pcs/


You may also like. NEW OMRON G3RODX02SN Solid State Relay G3R-ODX02SN 5-24VDC 1PCS. GP-104F-5M-NB06B Screen Touch Panel Glass Digitizer for GP-104F-5M-NB06B. New 109BM24GD2-2 For SANYO San AceB97 24V 0.34A cooling fan#QW 1PC. NEW FIT FOR Cummins Generator Set reverse Fan Blade 4931795 diameter 610mm 1PCS. Because of the different time zone, please give us some time, all the emails will be answered within 24 hours. Thanks for your understand and support! We will provide you with the most satisfactory solution. We can provide you with value discounts and more efficient and faster transportation. In the event that you receive the item is not in the standards above. Good communication helps buyers and sellers to solve any problems. We will be glad to work together and provide a satisfying solution. PaymentShippingReturn policyAbout usContact us.

]]> https://bladesetnew.com/new-fit-for-cummins-generator-set-reverse-fan-blade-4931795-diameter-610mm-1pcs/feed/ 0 https://bladesetnew.com/freud-sd208s-8-inch-diameter-stacked-carbide-pro-dado-set/ https://bladesetnew.com/freud-sd208s-8-inch-diameter-stacked-carbide-pro-dado-set/#comments Wed, 02 Mar 2022 06:22:41 +0000 https://bladesetnew.com/freud-sd208s-8-inch-diameter-stacked-carbide-pro-dado-set/





Freud SD208S 8-Inch Diameter Stacked Carbide Pro Dado Set. Freud’s new SD208S 8″ Stacked Dado Set has a true 8″ diameter and an optimized blade design for premium performance on all safety brake equipped and underpowered saws. This dado set delivers chip and splinter free flat bottomed grooves in plywood, melamine and solid wood. The SD208S is compatible with all saws including Saw Stop, Jet, Dewalt, Bosch, and more. It produces grooves ranging in sizes from 1/4″ to 7/8″. The set includes 2 blades, 3 chippers, spacers and a shim set for micro adjustability. Ideal for flat bottom grooves ranging in sizes from 1/4″ to 7/8″ in laminated plywood, melamine and solid wood. Optimized blade design for premium performance on all safety brake equipped and underpowered saws including Saw Stop, Jet, Dewalt, Bosch, and more. Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner. Retail store pricing may differ from online pricing. Hardware Sales is not responsible for service transit time. This information is provided by the carrier and excludes weekends and holidays. Note that transit times may vary, particularly during peak periods. SD208SI Standard Listing – 01 MGT0504. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tool & Air Tool Accessories\Saw Blades\Other Saw Blades”. The seller is “hardware_sales_inc” and is located in this country: US. This item can be shipped to United States.

• Brand: Freud
• MPN: SD208S
• Model: SD208S
• Country/Region of Manufacture: Italy
• UPC: 008925136002

]]> https://bladesetnew.com/freud-sd208s-8-inch-diameter-stacked-carbide-pro-dado-set/feed/ 0 https://bladesetnew.com/missouri-falcon-62-inch-diameter-5-blade-and-hub-set-made-in-the-usa/ https://bladesetnew.com/missouri-falcon-62-inch-diameter-5-blade-and-hub-set-made-in-the-usa/#comments Tue, 30 Jul 2019 10:11:44 +0000 http://bladesetnew.com/missouri-falcon-62-inch-diameter-5-blade-and-hub-set-made-in-the-usa/



See our Falcon blades in the GI JOE MOVIE’RETALIATION. SET OF 5 BLADES /HUB/STAINLESS STEEL BOLTS. LARGE 62” SWEPT AREA DIA. Laser cut, high tensile strength aircraft aluminum blades. Our 62 Inch Diameter Falcon Mach 5 blade set is our midsize blade and hub option in the Falcon wind turbine series. Smooth, fast, and well balanced. Advanced design for GM Delco alternators. To exact tolerances for high quality operation and appearance. All aluminum and 1018 steel construction will withstand severe weather conditions! Tested to 95 MPH winds. The gull wing design has eliminated noise and cascade failure that all other aluminum blades suffer from. The more wind, the higher the RPM keeps increasing non-stop. These large blades are designed for high torque. 62 diameter for extreme high speed and torque that all high power PMGs and PMAs require to put out any usable power. Extremely large pitches on aluminum blades act like an anchor, and don’t allow the blades to cut through the wind. Falcon Mach 5 blades have very little pitch! Will fit all PMAs with 17mm shaft. Falcon Mach 5 Blade & Hub. 1875 1018 zinc plated steel. 25 inch (6.35 mm) diameter blade mounting holes. 17 mm center hole. 669 inch for Delco alternator shaft. Made in the USA. 125 thick aircraft aluminum with added manganese for strength. Each blade measures 29.5 inches. Each blade is 7.5 inches (19.05 cm) wide. Assembled diameter: 62 inches. The Falcon wind turbine blades are compatible with these wind turbines. Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better. The item “Missouri Falcon 62 Inch Diameter 5 Blade and Hub Set Made in the USA” is in sale since Thursday, October 23, 2014. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits”. The seller is “missouriwind” and is located in Seymour, Missouri. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Ecuador, Guadeloupe, Iceland, Sri lanka, Nicaragua, Peru, Pakistan, Viet nam, Uruguay, Russian federation.

• EAN: Does not apply
• ISBN: Does not apply
• Brand: Missouri Wind and Solar
• UPC: Does not apply
• MPN: falmch5
• Bundle Listing: Yes
• Country/Region of Manufacture: United States
• Blade Material: Aluminum
• Blade Diameter: 62 Inches
• Blade Length: 30.75 Inches
• Custom Bundle: Yes
• Type: Wind Turbine Blade
• Model: Missouri Falcon
• Modified Item: No
• Bundle Description: Kit includes blades, nuts and bolts, and zinc plated hub.

]]> https://bladesetnew.com/missouri-falcon-62-inch-diameter-5-blade-and-hub-set-made-in-the-usa/feed/ 0 https://bladesetnew.com/missouri-falcon-62-inch-diameter-3-blade-wind-turbine-hub-set-made-in-the-usa/ https://bladesetnew.com/missouri-falcon-62-inch-diameter-3-blade-wind-turbine-hub-set-made-in-the-usa/#comments Sat, 06 Jul 2019 21:24:44 +0000 http://bladesetnew.com/missouri-falcon-62-inch-diameter-3-blade-wind-turbine-hub-set-made-in-the-usa/



See our Falcon blades in the GI JOE movie’RETALIATION’! Falcon Mach III wind turbine blades. Set of 3 extra large blades/hub/stainless steel bolts. Large 62” swept area DIA. MADE IN THE U S A. Falcon Mach 3 Blade & Hub. Smooth, fast, and well balanced. Advanced design for GM Delco alternators. To exact tolerances for high quality operation and appearance. All high tensile strength aluminum and 1018 steel construction will withstand severe weather conditions! Tested to 95 MPH winds. Extremely large pitches on aluminum blades act like an anchor, and don’t allow the blades to cut through the wind. Ours are low pitched for best performance. The gull wing design has eliminated noise and cascade failure that all other aluminum blades suffer from. The more wind, the higher the RPM keeps increasing non-stop. These extra large blades are designed for high. 1875 1018 zinc plated steel. 25 inch (6.35 mm) diameter blade mounting holes. 17 mm center hole. 669 inch for Delco alternator shaft. Made in the USA. 125 thick aircraft aluminum with manganese for added strength. Each blade measures 29.5 inches. 6.5 inches 16.51 cm. Assembled diameter: 62 inches. The Falcon wind turbine blades are compatible with these wind turbines. Upgrade your SUNFORCE 44444/AIR-X/AIR 403/AIR BREEZE. Wind Turbine Blade Set Includes. 1 zinc plated hub. 9 sets of stainless steel nuts and bolts. We have more Missouri Falcon blades sets available. 80 Diameter Falcon Mach 4 (3 Blades). 80 Diameter Falcon Mach 5 (5 Blades). 62 Diameter Falcon Mach 5 (5 Blades). Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better. The item “Missouri Falcon 62 Inch Diameter 3 Blade & Wind Turbine Hub Set Made in the USA” is in sale since Wednesday, October 22, 2014. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits”. The seller is “missouriwind” and is located in Seymour, Missouri. This item can be shipped worldwide.

• ISBN: Does not apply
• UPC: Does not apply
• Blade Material: Aluminum
• Blade Diameter: 62 Inches
• Blade Length: 30.75 Inches
• Bundle Listing: Yes
• Country/Region of Manufacture: United States
• MPN: FAL3
• Brand: Missouri Wind and Solar
• Blade Series: Falcon
• EAN: Does not apply
• Custom Bundle: Yes
• Type: Wind Turbine Blade
• Model: Missouri Falcon
• Modified Item: No
• Bundle Description: Kit includes blades, nuts and bolts, and zinc plated hub.

]]> https://bladesetnew.com/missouri-falcon-62-inch-diameter-3-blade-wind-turbine-hub-set-made-in-the-usa/feed/ 0 https://bladesetnew.com/missouri-falcon-80-5-inch-diameter-3-blade-and-hub-set-made-in-the-usa/ https://bladesetnew.com/missouri-falcon-80-5-inch-diameter-3-blade-and-hub-set-made-in-the-usa/#comments Fri, 31 May 2019 08:11:50 +0000 http://bladesetnew.com/missouri-falcon-80-5-inch-diameter-3-blade-and-hub-set-made-in-the-usa/



See our Falcon blades in the GI JOE MOVIE’RETALIATION’!! FALCON MACH 4 WIND TURBINE BLADES. SET OF 3 EXTRA LARGE BLADES/ZINC PLATED HUB/STAINLESS STEEL BOLTS. LARGE 80 1/2 SWEPT AREA DIA. Laser cut, high tensile strength aircraft aluminum blades. Our largest diameter in the Falcon series, the Falcon Mach 4 features 3 aluminum blades for an overall swept diameter of 80.5 inches. Precision balanced and hand crafted, no cascade failure that other aluminum blades suffer from. The more wind, the higher the RPM’s keep increasing. We tested our blades side by side with a similar competitor’s blade set and the Falcon blades started generating power 3.5 miles per hour sooner and with more RPM’s. Falcon Mach 4 Blade & Hub. Smooth, fast, and well balanced. Advanced design for GM Delco alternators. To exact tolerances for high quality operation and appearance. All high tensile strength aluminum and 1018 steel construction will withstand severe weather conditions! Tested to 95 MPH winds. Extremely large pitches on aluminum blades act like an anchor, and don’t allow the blades to cut through the wind. Ours are low pitched for best performance. The gull wing design has eliminated noise and cascade failure that all other aluminum blades suffer from. The more wind, the higher the RPM keeps increasing non-stop. These extra large blades are designed for high. 1875 1018 zinc plated steel. 25 inch diameter blade mounting holes. 669 for Delco alternator shaft. Made in the USA. 125 inch thick aircraft aluminum. 39 inches (99.06 cm) long. 6.5 inches (16.51 cm) wide. Assembled diameter: 80.5 inches (2.04 meters). Wind Turbine Blade Set Includes. Set of 3 extra large Falcon blades. 1/4 inch thick zinc plated hub. 9 sets of bolts. FOR A LARGER SET TRY OUR NEW. FALCON MACH 5 BLADES. LOWEST START UP OF ANY BLADES. Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better. The item “Missouri Falcon 80.5 Inch Diameter 3 Blade and Hub Set Made in the USA” is in sale since Wednesday, October 22, 2014. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Wind Generators”. The seller is “missouriwind” and is located in Seymour, Missouri. This item can be shipped worldwide.

• EAN: Does not apply
• ISBN: Does not apply
• Brand: Missouri Wind and Solar
• UPC: Does not apply
• MPN: FALCON80MACH4-3
• Bundle Listing: Yes
• Country/Region of Manufacture: United States
• Blade Material: Aluminum
• Blade Diameter: 80.5 Inches
• Blade Length: 39 Inches
• Type: Wind Turbine Blade
• Modified Item: No
• Non-Domestic Product: No
• Custom Bundle: Yes
• Bundle Description: Includes Falcon Blades, hub, and nuts and bolts for assembly.
• Model: Missouri Falcon

]]> https://bladesetnew.com/missouri-falcon-80-5-inch-diameter-3-blade-and-hub-set-made-in-the-usa/feed/ 0 https://bladesetnew.com/missouri-falcon-80-5-inch-diameter-5-blade-and-hub-set-made-in-the-usa/ https://bladesetnew.com/missouri-falcon-80-5-inch-diameter-5-blade-and-hub-set-made-in-the-usa/#comments Tue, 21 May 2019 07:51:49 +0000 http://bladesetnew.com/missouri-falcon-80-5-inch-diameter-5-blade-and-hub-set-made-in-the-usa/



Missouri Falcon Wind Turbine Blades. Set of 5 Extra Large Blades/Zinc Plate Hub/Stainless Steel Bolts Extra Large 80 1/2 Swept Area (Diameter) (This is for blades and hub only). Extra Large 80 1/2 Swept Area (Diameter). Laser cut, high tensile strength aircraft aluminum blades. Our largest diameter in the Falcon series, the Falcon Mach 5 features 5 aluminum blades for an overall swept diameter of 80.5 inches. Precision balanced and hand crafted, no cascade failure that other aluminum blades suffer from. The more wind, the higher the RPM’s keep increasing. We tested our blades side by side with a similar competitor’s blade set and the Falcon blades started generating power 3.5 miles per hour sooner and with more RPM’s. Falcon Mach 4 Blade & Hub. Smooth, fast, and well balanced. Advanced design for GM Delco alternators. To exact tolerances for high quality operation and appearance. All high tensile strength aluminum and 1018 steel construction will withstand severe weather conditions! Tested to 95 MPH winds. Extremely large pitches on aluminum blades act like an anchor, and don’t allow the blades to cut through the wind. Ours are low pitched for best performance. The gull wing design has eliminated noise and cascade failure that all other aluminum blades suffer from. The more wind, the higher the RPM keeps increasing non-stop. These extra large blades are designed for high. 1/4 inch (6.35 mm) thick zinc plated steel. 1875 1018 zinc plated steel. 25 inch (6.35 mm) diameter blade mounting holes. 669 for Delco alternator shaft. Made in the USA. 39 inches (99.06 cm) long. Blades are 7.75 inches. Assembled diameter: 80.5 inches (2.04 meters). Wind Turbine Blade Set Includes. 1 zinc plated hub. Tainless steel nuts and bolts. Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better. The item “Missouri Falcon 80.5 Inch Diameter 5 Blade and Hub Set Made in the USA” is in sale since Thursday, March 12, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Wind Generators”. The seller is “missouriwind” and is located in Seymour, Missouri. This item can be shipped worldwide.

• EAN: Does not apply
• ISBN: Does not apply
• Brand: Missouri Wind and Solar
• UPC: Does not apply
• MPN: FALCON80MACH5-5
• Bundle Listing: Yes
• Country/Region of Manufacture: United States
• Blade Material: Aluminum
• Blade Diameter: 80.5 Inches
• Blade Length: 39 Inches
• Modified Item: No
• Non-Domestic Product: No
• Custom Bundle: Yes
• Type: Wind Turbine Blade
• Bundle Description: This Falcon 5 blade set includes the blades, hub, and nuts and bolts required for assembly.
• Model: Missouri Falcon

]]> https://bladesetnew.com/missouri-falcon-80-5-inch-diameter-5-blade-and-hub-set-made-in-the-usa/feed/ 0